Wednesday, September 25, 2013

Hardened Vent References that yield 1%

On August 9, 2013, the NRC issued the three page document, prepared at my request, Basis for Venting Capacity in Order ER-13-109.  Here it is:





































The above three page document is not without its problems. On page 3 it has a Date: August 9, 2012; the correct date is August 9, 2013. In addition, although the document was prepared in response to my request, this is not discussed, so there is no way of tracking the document with Leyse as a key word. This led me to immediately send the following e-mail to the NRC.

From: Bobleyse@aol.com
To: jld_public.resource@nrc.gov
Sent: 9/24/2013 8:14:48 P.M. Mountain Daylight Time

Subj: Satorius letter to Senator James E. Risch, August 29, 2013

Mark A. Satorius
Executive Director for Operations

The attachment consists of five pages. Page 1 is your cover letter to Senator Risch, August 29, 2013. Page 2 is a copy of an e-mail that was allegedly sent to me on August 9, 2013. Pages 3, 4, and 5 constitute a three page document that responds to my request for references that document the basis for technical requirement 1.2.1 that is in Order EA-13-109.

Page 5 of the attachment is page 3 of the three page document that responds to my request for references that document the basis for technical requirement 1.2.1 that is in Order EA-13-109. This page 5 has the following in its final two lines.
 
Date: August 9, 2012

ADAMS Accession No.: ML13221A011

Now, I have conducted an Advanced Search via the ADAMS Accession No.: ML13221A011 and I find that the Document Date is 08/09/2013 and that the date that it was added to ADAMS was 08/13/2013. I believe that you should correct the date of the three page document from August 9, 2012, to August 9, 2013. I also believe that the three page document should acknowledge that it was prepared at the request of Robert H. Leyse.

Robert H. Leyse

The three page document that I have pasted above may be found in an enlarged version at: 

http://pbadupws.nrc.gov/docs/ML1322/ML13221A011.pdf



No comments: